ROUNTINE PROFESSIONAL LANDSCAPE LIGHTING MAINTENANCE IS HIGHLY RECOMMENDED FOR ALL OUTDOOR LANDSCAPE LIGHTING SYSTEMS
All outdoor lights are subject to a harsh environment due to the changing seasons in our Midwest region. It is recommended scheduling annual or bi-annual maintenance visits with The Illuminators Outdoor Lighting to maintain peak lighting performance and lighting system integrity. We will perform maintenance on your outdoor landscape lighting system even if The Illuminators did not originally install it. Some of the following maintenance tasks that need to be performed on a routine basis include:
- Grease light bulb sockets to prevent rust and deterioration (Extremely Important!!)
- Clean fixture lenses to prevent dimming effect caused by a dirty lens
- Straighten and adjust fixtures to maintain proper direction of intended light output
- Check for proper operation of timers, control modules, and photocells
- Adjust timers and controls that are incorrect from changing seasons and power outages
- Minor relocation of light fixtures due to changing and maturing landscapes
- Trim and prune plantings around light fixtures to prevent light blockage
- Bury exposed wire
- Change out failed bulbs as needed
- Verify proper transformer operation and internal wire connections
DOES YOUR OUTDOOR LANDSCAPE LIGHTING NEED REPAIR OR SERVICE?
No need to worry if your outdoor lights aren’t working – The Illuminators are fully trained and properly equipped to troubleshoot and correct the following outdoor landscape lighting service issues in a quick and efficient manner, even if we did not originally install the lighting:
- Locate and repair cut wires above and below ground
- Troubleshoot tripping lighting circuits
- Correct faulty wiring and connections
- Replace failed light bulb sockets
- Install new light bulbs
- Replace failed transformers
- Replace faulty GFCI electrical outlets
- Replace faulty timers and photocells
- Repair and or replace broken light fixtures
- Troubleshoot and correct dim lighting and improper voltage
- Install additional light fixtures
- Reset timer settings
- Any other issue causing your current lighting not to operate correctly
